How to setup and use your SPT GPS Device.
1. Create your new GameTraka Account, please visit www.gametraka.com and follow the prompts.
- Guidelines on the step-by-step procedure to create an account. Click here.
2. Download SPT2 Bridge for Mac and/or Windows.
3. Plug your SPT2 device/s into the SPT2 Bridge via the provided USB cord or your charge case.
4. Follow the prompts in the SPT2 Bridge to register your device to your GameTraka account.
5. Charge your device and then once fully charged, go outside and turn the device on. When using the device for the first time, ensure you leave the device on for 10-15 minutes in an open sky environment.
Note: make sure the GNSS light (middle light) turns Green, indicating a strong signal has been established with the satellite.
6. Record your performance and turn the device off.
7. Once complete, plug your device/s into the SPT2 Bridge via the provided USB or charge case.
8. Follow the steps outlined in the SPT 2 Bridge to upload your performance data to GameTraka.
If you have any questions about this process, feel free to lodge a support ticket and our team would gladly assist.