How do I check if my SPT GPS unit is full of memory?
On the SPT Unit:
If the lights flash yellow simultaneously when attempting to power on the device and then it immediately shuts off, this indicates that the unit is either full of memory or has no battery.
In the SPT Bridge:
Connect your SPT unit to the SPT Bridge. Once connected, check the bar next to your SPT Serial Number. If the bar is full red, it means the memory is full.
What should I do if my SPT GPS shows a red full bar?
A: You will need to download the data from your device and clear its memory to make space for new recordings.
Follow the steps:
- Connect your SPT GPS to the SPT Bridge and follow the steps in the How to Use the SPT2 Bridge (Online Mode) guide to upload your performance data to GameTraka.
- Once your data is uploaded, follow the instructions in the How to Erase Your Device(s) support article to clear the memory.
Can I still record data if my SPT GPS unit's memory is full?
A: No, if your SPT GPS unit is full, it will not record any new data until the memory is cleared.
How often should I check the memory status of my SPT GPS unit?
A: It's a good practice to check the memory status regularly, especially after multiple recording sessions, to ensure the device is ready for new data collection.
What if I don't clear the memory after it's full?
A: If you don’t clear the memory, the unit will not be able to store new data, which may impact your ability to track and analyze performance metrics. Always clear the memory once it’s full to avoid interruptions.